Backup sensor kit for Rosen and Car Show navigation receivers
Share this product:
Our take on the Rosen DP-1032
Safety in tight spots
Add an extra measure of safety when you're backing up in tight spots. The DP-1032 backup sensor kit connects to your Rosen or Car Show navigation receiver, and alerts you when an object gets too close to the back of your vehicle. The kit includes four sensors, a wiring harness, an interface for your navigation receiver, a 24.5' cable, and a special drill bit to help with the installation. Warranty: 1 year.
What's in the box?
Download owner's manual
- Main sensor module (with attached 7" cable terminated by a proprietary multi-pin connector)
- 24.5' Connector cable (with a proprietary multi-pin connector on each end)
- 4 Sensors (with attached 8' cable terminated by a proprietary 2-pin connector)
- 8" Camera/Radar harness
- 3/4" Metal hole-saw bit
- Installation Guide
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Rosen Backup Sensor Kit (DP-1032) is
compatible with select Rosen & Car Show Multimedia Navigation head units. The
Rosen Backup Sensor Kit includes a hideaway sensor module, a 24.5' connector
cable, exterior sensors, and a rear-camera/radar input harness. The
rear-camera/radar input harness plugs into the back of the Rosen or Car Show
Multimedia Navigation head unit in order to plug in the included sensor module
and optional rear-view camera (135DP1068,
sold separately). The hideaway sensor module is mounted inside the vehicle and
connected to your Rosen or Car Show Multimedia Navigation head unit using the
supplied 24.5' connector cable. The 4 exterior sensors plug into the hideaway
module and are mounted outside the rear of the vehicle (symmetrically on the
bumper surface). Once installed, the Rosen Backup Sensor Kit will send an
audible warning through your vehicle's audio system, if your vehicle backs up to
close to an object.
Sensor Mounting: The Rosen Backup Sensor Kit comes supplied
with a 3/4" metal hole-saw bit that attaches to a cordless or electric drill
(not included) to cut out openings for the 4 exterior sensors in your vehicle's
bumper. Once these holes are cut-out in your vehicle's bumpers, the exterior
sensors clip into place. When installed, the sensor should point straight back,
not to the sides, up, or down.
- Hideaway Sensor Module: Width = 4.9375", Height =
1.125", Depth = 3.1875"
- Exterior Sensors: Diameter = 0.875", Depth = 1.0"
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Rosen DP-1032, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963