Features
Inputs and Outputs Notes
Supplied Software
Features
Overview: The retro-looking Fujifilm X-Pro1 is an
interchangeable lens digital camera. It has the new X lens mount, and is
compatible with the new XF Fujinon fast aperture prime lenses. This "body only"
package does not include any lenses.
Compatible Lenses: The X-Pro1 is compatible with the
following XF Fujinon prime lenses: XF18mm F2 R (item #072XP18MM),
XF35mm F1.4 R (072XP35MM),
and XF60mm F2.4 R Macro (072XP60MM).
These lenses offer precise control over depth-of-field and excellent
out-of-focus bokeh, due to the design of the molded aperture diaphragm blades.
High Performance LCD Monitor:
The X-Pro1 has a 3" color LCD
monitor featuring approximately 1,230,000 dots and approximately 100% horizontal
and vertical coverage in the shooting mode. The monitor has a special
anti-reflective coating which reduces the surface reflectivity down to 0.2%. When shooting, you can choose from a
standard display, a detailed display, or a custom display which allows you to
select from up to 15 items to display in the monitor.
Hybrid Viewfinder: The camera is equipped a Hybrid Viewfinder, which is switchable between an optical viewfinder and
electronic viewfinder. When an XF series lens is mounted, the viewfinder
magnification and frame size are automatically switched, depending upon the
mounted lens. As you bring the camera up to your face, an eye sensor in
the viewfinder will switch automatically to viewfinder mode. A built-in diopter
allows you to adjust the viewfinder to your eyesight, either with or without
glasses. Details of each type of viewfinder include the following:
- Optical Viewfinder (OVF): The Reverse Galilean Optical
Viewfinder offers a wide field of view for maximum clarity with no shutter
time lag. It has approximately 90% frame coverage and 0.37x/0.6x switchable
magnification.
- Electronic Viewfinder (EVF): The 0.47" High-Definition Electronic
Viewfinder provides 100% coverage and detailed shooting information with its
1,440,000 dots of resolution. You can preview focus, depth of field,
exposure, and white balance before you shoot, and view the photo instantly
after shooting.
Image Sensor/Processor:
The X-Pro1 features a 23.6mm x 15.6mm APS-C format, X-Trans CMOS image sensor with
16.3-million effective square pixels. The new EXR Processor Pro translate data
captured by the complex color filter array pattern of the image sensor at
lightning speed to achieve higher speed and precision than previous generations.
Recording Media: Still images and movies can be recorded onto
optional SD, SDHC, or SDXC memory cards. No memory cards are included with the
camera.
Still Image Quality: The X-Pro1 records still images in JPEG
format in 3:2, 16:9, and 1:1 aspect
ratios in three sizes and two compression ratios (Fine or Normal). In addition, RAW images can be
recorded from the raw, uncompressed image data from the camera's image sensor.
RAW format images must be processed on a computer using the supplied RAW File
Converter application software. You can also shoot a RAW + JPEG image at the
same time, with separate RAW and JPEG files recorded and stored.
| JPEG 3:2 Image Sizes |
JPEG 16:9 Image Sizes |
JPEG 1:1 Image Sizes |
L: 4896 x 3624
M: 3456 x 2304
S: 2496 x 1664 |
L: 4896 x 2760
M: 3456 x 1944
S: 2496 x 1408 |
L: 3264 x 3264
M: 2304 x 2304
S: 1664 x 1664 |
HD Movies: The X-Pro1 can record Full HD movies in MOV
format (H.264 standard) at 24 frames per second with stereo sound. Available
frames sizes are 1920 x 1080 (Full HD) and 1280 x 720 (HD). The maximum movie
length is 29 minutes.
Motion Panorama: The camera is capable of taking panoramic images by
panning the camera through one of two angle settings. As you pan the camera,
multiple frames are recorded and automatically stitched together in the camera
to create the panoramic image. The Motion Panorama options are:
- Motion Panorama L:
- Vertical: 2160 x 7680 (16.6M)
- Horizontal: 7680 x 1440 (11.1M)
- Motion Panorama M:
- Vertical: 2160 x 5120 (11.1M)
- Horizontal: 5120 x 1440 (7.3M)
Shooting Modes: The Fujifilm X-Pro1 lets you set the shutter
speed and aperture automatically or manually. The shutter speed and aperture
settings combine for four shooting modes:
| Shooting Mode |
Shutter Speed¹ |
Aperture² |
| Program AE |
Automatic |
Automatic |
| Shutter Priority |
Manual |
Automatic |
| Aperture Priority |
Automatic |
Manual |
| Manual |
Manual |
Manual |
-
¹ Shutter Speed Options:
Auto, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/60, 1/30, 1/15,
1/8, 1/4, 1/2, 1, Time (selectable 2 to 30 sec), Bulb
-
² Aperture Options:
Depends upon the attached XF lens: XF18mmF2 R (F2.0 to F16), XF35mmF1.4
R (F1.4 to F16), XF60mmF2.4 R Macro (F2.4 to F22)
ISO Sensitivity: You can manually set the camera's sensitivity to ISO
200, 240, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000,
5000, or 6400. Extended settings are equivalent to ISO100
(Low), ISO12800 (High) or ISO25600 (High). You can also choose an Auto ISO
setting with maximum settings of 400, 800, 1600 or 3200. The Auto settings will adjust the
sensitivity settings according to the shooting conditions. The higher the sensitivity setting, the better the camera is at
reducing blur in poor lighting conditions, however, high settings can result in
more noise in the recorded images.
White Balance:
White balance is used to preserve natural colors under different types of
lighting. You can select
Auto, Direct Sunlight, Shade, "Daylight" fluorescent lamps, "Warm White" fluorescent
lamps, "Cool White" fluorescent lamps, Incandescent light and
Underwater (requires waterproof case). In addition, you can measure for a white
balance value or display and select from a list of color temperatures.
Film Simulation: The X-Pro1 can simulate the effects of
different kinds of film, including black-and-white. You can select one of the
following options:
- Provia/Standard: standard color reproduction
- Velvia/Vivid: a high-contrast palette of saturated colors, suited
for nature photos
- Astia/Soft: a soft-toned palette of less-saturated colors
- Pro Negative Std: a soft-toned palette. The range of
hues available for skin tones is enhanced; a good choice for studio
portraits.
- Pro Negative Hi: offers slightly more contrast than Pro
Negative Std, making it ideal for outdoor portraits.
- Monochrome: standard black-and-white
- Monochrome + Y Filter: black-and-white pictures with slightly
increased contrast; tones down the brightness of the sky
- Monochrome + R Filter: black-and-white picture with increased
contrast; also tones down the brightness of the sky
- Monochrome + G Filter: softens skin tones in black-and-white
photos
- Sepia: takes pictures in sepia tone
Color Space: Depending upon how you intend to use the image,
you can choose the output color space at the general sRGB setting or the broader
color rendition of Adobe RGB.
Exposure Compensation: Using the dedicated Exposure
Compensation dial on the top of the camera, you
can alter the exposure from the value suggested by the camera, making pictures
brighter or darker. You can adjust the exposure a total of 13 steps from -2.0 to +2.0 EV in 1/3
EV steps. Exposure compensation is available in all shooting modes except
Manual.
Bracketing: You can take a series of photos with varying
settings for each picture. Bracketing options include:
- AE: Each time the shutter is pressed, the camera will
take three shots up to about 6 fps, one using the metered value for
exposure, the second overexposed by the selected amount, and the third
underexposed by the same amount.
- ISO: Each time the shutter is pressed, the camera will
take three shots, one using the current sensitivity setting, the second with
the sensitivity raised, and the third with the sensitivity lowered.
- Film Simulation: Each time the shutter is released, the
camera takes one shot and processes it to create copies with the film
simulation settings selected.
- Dynamic Range: Each time the shutter is pressed, the
camera will take three shots up to about 6 fps, each with different dynamic
ranges: 100% for the first, 200% for the second, and 400% for the third.
Continuous Shooting: You can capture motion in a series of
pictures using the Continuous Shooting mode. The camera can take pictures at 3 frames per second
or 6 fps. Focus and exposure are determined by the first frame, and the flash is
turned off automatically.
Multiple Exposures: You can create a photograph that
combines two exposures.
Self-timer: The camera gives you the choice of a 10-second
or 2-second self timer. The 10 second self timer is recommended for self
portraits, while the 2-second self timer is used to reduce blur caused by the
camera moving when the shutter button is pressed.
Focus Modes: The camera lets you choose how the camera
focuses. You can select Single AF, Continuous AF, or Manual Focus using the
focus ring on the attached lens.
Flash Modes: The
X-Pro1 does not have a built-in flash. Optional flash units can be used for
additional lighting at night or indoors under low light. Red-eye removal minimizes the
"red-eye" effect, and is available for each flash mode. You can choose from the following flash modes:
-
Auto: flash fires
automatically as required by the shooting conditions
-
Forced Flash:
flash will fire whenever a picture is taken
-
Slow Synchro:
auto flash combined with slow shutter speeds (tripod recommended)
-
2nd Curtain Sync: the flash fires immediately before the
shutter closes
-
Suppressed Flash (Off): flash does not fire, even when the
subject is poorly lit.
Light Metering:
The X-Pro1 uses 256-segment, TTL (through-the-lens) metering, where the camera
automatically assesses the scene and selects the optimum exposure. You can
select from three metering options: Multi, Spot, or Average.
Viewing Images: Images can be
played back one-at-a-time or in a variety of multi-frame views. Multi-frame
options include a 5-frame cascading display (two previous and two following
frames cascaded behind the highlighted image), a side-by-side two-frame display
(with smaller thumbnails of the previous and next frames, 9-image grid (3 x 3)
and a 100-image grid (10 x 10) of micro-thumbnails. In the 9- and 100-image grid
views, the highlighted image is slightly enlarged.
Image Search: The Image Search function lets you search
pictures by the following criteria:
- Date: Search for photos by date
- Face: Search for photos that include faces
- Favorites: Search for photos by rating
- Type: You can easily search your pictures according to the type
of photos: still photos, pictures taken in burst mode, or movie footage.
- Upload Mark: Search for pictures selected for upload to
a specified destination.
Playback Zoom/Cropping: You can
enlarge a still image in the monitor according to the image quality (size).
After you have zoomed in and scrolled the picture to the desired composition,
you can create a cropped image of a picture. Copies will have an aspect ratio
of 3:2, and will be saved as a separate file.
Resize: To create a small copy of a picture, you can select
"Resize" from the menu. The new images vary in size with the original
image.
Slide Show: You can view pictures in an automated slide
show. You can select normal playback, normal playback that zooms in on faces, or
multiple pictures at once.
Printing Pictures: Using DPOF
(Digital Print Order Form), you can designate which images to print, and whether
to print them with or without date. Pictures can be printed as followed:
- Printer or Photo Lab:
plug the camera into a Pictbridge-compatible printer,
insert the memory card into a compatible printer, or take the memory card to
a digital photo lab
- Transferring to Computer:
transfer the images to a computer before printing them
Power Requirements: The
X-Pro1 is powered by the supplied NP-W126 Lithium-Ion rechargeable battery.
A fully-charged NP-W126 is good for approximately 300 shots. The supplied BC-W126
battery charger will charge an NP-W126 battery in about 150 minutes.
Auto Power Off Function: When
the camera is operated on battery power, the Auto Power Off function will automatically
turn off the camera to reduce the drain on the batteries if no
operations are performed for 2 minutes or 5 minutes, as set in the menu.
Regardless of the option selected, the camera will not automatically turn off
when connected to a printer or computer, or when a slide show is in progress.
X-Pro1 Accessories: The following accessories are made
specifically for the X-Pro1:
- XF18mmF2 R, XF35mmF1.4 R and XF60mmF2.4 R Fujinon lenses
- PRF-52 and PRF-39 protective filters
-
HG-XPro1 Grip
-
EF-20 Shoe Mount Flash
-
EF-42 Shoe Mount Flash
- EF-X20 Shoe Mount Flash
-
LC-XPro1 Leather Case
-
NP-W126 Battery: Spare Lithium-Ion rechargeable battery
-
BC-W126 Battery Charger
Inputs
and Outputs Notes
Digital In/Out: The X-Pro1 features a single proprietary jack for
connecting the supplied USB
cable. This output allows you to download your photos to your
computer via USB, or connect the camera to a compatible PictBridge printer.
HDMI: The camera has a mini-HDMI (Type C) output for
connecting the camera to your HDTV. An optional mini-HDMI to HDMI cable (such as
the
119HDMICAM) is required.
Supplied
Software
System Requirements: The X-Pro1 is equipped with MyFinePix Studio Version
3.2 for Windows and FinePix Viewer Version 3.6 for Macintosh. In order to use this software, your computer must have
one of the following operating systems:
- MyFinePix
Studio (Windows): Windows 7 (Service Pack 1), Windows Vista
(SP2), Windows XP (SP3)
- FinePix Viewer (Macintosh): Mac OS X Version 10.3.9 -
10.6 (OS X Ver.10.7 and later not supported)
