Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofer
Midrange
Tweeter
Crossover
Woofer
Woofer: The C 62C component system includes woofers made of
sisal fiber with durable rubber surrounds. The mechanical advantages of sisal,
rigidity and inner damping, result in faster transients and precise detail.
Magnet cover: The woofers are shipped with a rubber magnet
cover to protect the speaker. If the cover is removed the depth changes slightly:
- Top Mount Depth: 2.54"
- Bottom Mount Depth: 2.71"
Terminals: Each woofer has screw terminal inputs that will
accommodate bare wire or spade connectors up to 0.315" wide.
Size Classification Note: Crutchfield has traditionally referred
to this woofer size as a 6-3/4", while some manufacturers, including Helix
(Audiotec Fischer), call it a 6-1/2". Please refer to the Crutchfield Vehicle
Selector to confirm fit in your vehicle.
Midrange
Midrange: The system uses two 2" silk dome midrange with
neodymium motor structures and damped coupling (enclosure) volume. The flush mount
flange is an integral part of the midrange housing and each has a seven inch input
wire attached. No other speaker wire is included with the system.
Midrange Dimensions:
| |
Frame Diameter |
Cutout Diameter |
Mounting Height |
Mounting Depth |
| Flush Mount |
3.542" |
3.073" |
0.675" |
1.413" |
Tweeter
Tweeter: The system uses 1" silk dome tweeters with
neodymium motor structures and damped coupling (enclosure) volume. The flush
mount flange is an integral part of the tweeter housing. Each tweeter has a
seven inch input wire attached. No other wire is included with the system.
Tweeter Dimensions:
| |
Frame Diameter |
Cutout Diameter |
Mounting Height |
Mounting Depth |
| Flush Mount |
1.97" |
1.73" |
0.375" |
1.012" |
Crossover
Crossover: The crossover inputs and outputs are screw terminals
and will accommodate bare wire or spade connectors up to 0.3" wide. The midrange
and tweeter output levels are adjustable using separate jumpers under the cover, +3dB,
0dB, -1.5dB or -3dB. A different jumper changes the woofers' expected impedance from
4-ohms to 2-ohms, used when an optional second pair of C 6B woofers is added (item
number 975C6B, sold separately). No crossover frequency or slope information was
provided by the manufacturer.
Crossover Dimensions:
- Length: 6.505"
- Height: 1.773"
- Width: 7.164"
