Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Punch Woofer: The enclosure houses one front-firing Rockford
Fosgate Punch P1S4-10 10" subwoofer. The 4-ohm, single voice coil sub features
a StampCast steel frame, a Kevlar fiber reinforced paper cone, and NBR surround
(Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider
venting help keep the subwoofer cool.
Spider: A compliant linear spider made from tear and fatigue
resistant poly-cotton improves mechanical stability under high excursion, maintaining
consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high
quality 5/8" MDF (medium-density fiberboard), which resists flexing and has
anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision
construction through computer design. The enclosure consists of one front firing
10" Punch P1 series subwoofer with a proprietary high-flow, low-noise port.
The speaker terminals are located on the left side of the box (when facing the
box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary
high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density
carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of
high current, spring loaded binding posts. The binding posts are located on the
left side of the box and will accept pin connectors, single or dual banana plugs,
or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 250 watts RMS;
500 watts peak power.
CEA-2031 Compliant: Power handling on the P1S4-10 subwoofer
conforms to CEA-2031 industry standards. This means the subwoofer has the capacity
to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs
include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth
of just the enclosure is 15-1/4 inches at the base and 13 inches at the top.
