Audio Section
USB/Android/Aux Integration
iPod/iPhone Control
Disc Playback
AM/FM Tuner + SiriusXM Ready
Display Features
Remote Control
Audio Section
Excelon Series: The KDC-X397 CD receiver is part of
Kenwood's Excelon series line-up. It incorporates the latest technologies and
delivers the highest sonic performance. From advanced audio tuning capabilities,
crossover and equalizer system, high-voltage preouts (4V), and a two-year
warranty - Kenwood Excelon represents exceptional audio quality with
long-lasting dependability.
24 Bit D/A Converter: The Kenwood Excelon KDC-X397 utilizes a 24-bit
digital to analog converter for superior sound quality.
MOSFET Amplifier: The Kenwood Excelon KDC-X397 is equipped with a
MOSFET amplifier. Compared to conventional power supplies, the MOSFET
amplification circuit is smaller and more efficient, and it delivers increased
power with less distortion and absolutely zero on/off switching noise. More
power means louder and cleaner music at higher volumes because you're not
pushing the limits of the amplification circuit. The power output specs for the
KDC-X397 are as follows:
- Full Bandwidth Power: 22 watts RMS x 4 channels (at 4
ohms, 20-20kHz, 1% THD)
- Maximum Output Power: 50 watts x 4 channels
6ch/4V Preamp Outputs: The KDC-X397 features front, rear
and subwoofer 4.0-volt preamp outputs. The front and rear speaker preamp outputs
are balance and fade adjustable. The subwoofer preamp output is non-fading. The
front, rear, and subwoofer preamp outputs are fixed to the rear chassis of the
head unit.
Front & Rear High-Pass Filter: The KDC-X397 features a
High-Pass Crossover for the front & rear channels when your front & rear
speakers are connected by the unit's speaker-outputs or preamp-outputs. You can
adjust the high-pass crossover from "Through", 100, 120, or 150 Hz. The
"Through" selection is a full-range setting.
Subwoofer Controls: The Kenwood Excelon KDC-X397 offers the following subwoofer controls, when you
are using unit's subwoofer preamp output.
- Low Pass Filter: The receiver
features a built-in Low Pass Filter control for the preamp-output, when the
output is set to Subwoofer. You can select from 85 Hz, 120 Hz, 160 Hz, or off.
- Subwoofer Phase: You can adjust the phase of the
subwoofer output between 180-degrees (Reverse) or 0-degrees (Normal).
- Subwoofer Level: Once the Subwoofer preamp output is
activated, you can independently control the
subwoofer preamp output level (-15 to +15) from the CD receiver.
Speaker Settings: The Speaker
Setting function tailors the head unit's audio settings according to the
type of speakers in your vehicle. You may select a Speaker Setting of 'SP-Off'
(flat/off), 'SP-OEM' (for OEM factory speaker systems), 'SP-6x9/6' (for systems with 6"
and 6"x9" speakers), or 'SP-5/4' (for systems with 4" and 5" speakers).
Preset EQ: Eight EQ curves are preset into memory, allowing
you to recall the best preset EQ curve for different types of music. Each preset
has its own level settings for bass (100Hz), midrange (1kHz), and treble
(12.5kHz). You can choose from the following preset EQ curves - Rock, Pops,
Easy, Top 40, Jazz, Natural, Game, and User.
EQ Pro: The Excelon KDC-X397 features independent Bass,
Treble, and Midrange control when the Preset EQ is in User mode. EQ Pro allows
you to adjust the following settings for the Bass, Treble and Mid frequency
levels.
|
EQ Pro |
| Center
Frequency |
Q-Factor |
Bass
Extension |
Level |
| Bass |
60, 80, 100, or 200 Hz |
1.00, 1.25, 1.50, or 2.00 |
On/Off |
-8 to +8 |
| Midrange |
0.5k, 1.0k, 1.5k, or 2.5k Hz |
0.75, 1.00, or 1.25 |
N/A |
| Treble |
10.0k, 12.5k, 15.0k, or17.5k Hz |
N/A |
N/A |
Note: You can store bass, middle and treble tone settings for each source (CD, AM/FM, Aux, USB,
iPod, and Pandora).
Sound Enhancements: The head unit provides further sound
enhancements for your car audio system.
- Bass Boost: The Kenwood CD receiver features a Bass
Boost control that can be set to the following levels (BB1, BB2, BB3, or
Off).
- Loudness: This function enhances low and high
frequencies to make the sound clearer lower volumes. There are 3 levels
(LV1, LV2, or Off).
- Supreme Setting: When MP3 or WMA files encoded at a low
bit rate (less than 96 kbps, 44.1k, 48kHz) are played, the Supreme Setting
function restores their high frequencies so the sound quality is closer to
files encoded at a high bit rate. The processing is optimized for the
compression format and the bit rate used. When the Supreme Setting is Off,
the unit plays the original sound stored in the audio file.
Volume Offset: The level of each source may be independently
adjusted to prevent radical leaps in output volume when switching from one
source to another. The available settings range from -8 to 0 (-8 to +8 for Aux
source).
Key Beep: The in-dash head unit provides an audible beep to
confirm button operation. This function can be turned On or Off.
USB/Android/Aux Integration
USB Port: The Kenwood Excelon KDC-X397 features a front panel
USB (type-A) port that is hidden behind a flip-up cover. The USB port
enables connection and control of a portable USB mass-storage class (MSC) device;
such as your Android smartphone, portable digital audio player, or USB
thumbdrive. The unit supports playback of MP3 (8-320 kbps) and WMA (32-192 kbps) music files
stored on a compatible USB memory device formatted with FAT16 or
FAT32 file system. Your USB device should only have a maximum of 8 folder
layers, 255 folders, and 255 files per folder - with a maximum of 65,025 files
and folders. USB portable audio players that can be charged via USB will be
charged when plugged into the CD receiver's USB port (max. 1A), and the vehicle's ignition
switch is set to ACC or On.
Note: You cannot connect a USB device via a USB hub or
Multi-Card Reader to this unit.
Music Control for Android Smartphone: The Kenwood Music
Control app for Android organizes your Android smartphone's music, while
providing quick and easy search capability from the Kenwood CD receiver. The
free
Kenwood Music Control App for Android can be downloaded onto your Android
smartphone from the Google Play App Store. Your Android smartphone must be
running Android OS 2.2 or later. Once the app is downloaded and has a chance to
organize all the stored music on your Android smartphone, you can connect your
Android smartphone to the Kenwood CD receiver via USB (your compatible Android
smartphone must be recognized as a USB mass storage class device; not
compatible with MTP protocol). The Kenwood Music Control app offers the
following Android supported functions.
- Song Management: Music stored in your Android
smartphone can be navigated from the Kenwood CD receiver. Songs can be
easily selected by searching for a Song title, Artist name, Album label, or
Genre.
- Song Information Display: Song information such as
Artist name, Song title, and Album label are displayed on the connected
Kenwood CD receiver.
- Mood Playlist: Playlists can be created by classifying
songs into categories by type of mood. Songs are analyzed and classified
into the following categories of moods - High Energy (Active/Powerful/Core),
Acoustic (Detailed/Simple/Smooth/Easy), Standard (Dynamic/Rockin/Vivid),
Stylistic (Cool/Urban/Trance)
- Intro Skip: This function allows you to choose and
listen to only the hook-lines of songs stored in your Android smartphone.
Note: When the Kenwood Music Control app is first
downloaded it will require some time to populate all the music, so we
suggest doing this overnight.
Music Files Format Supported by Music Control app for Android:
| Codec |
Extension |
Bit Rate |
Sampling Frequency |
| AAC |
.aac, m4a |
up to 160 kbps |
8-48 kHz |
| MP3 |
.mp3 |
8-320 kbps |
n/a |
| PCM/WAV |
.wav |
8-/16-bit |
n/a |
Music Editor Compatible: The Kenwood Excelon KDC-X397 supports the
PC application, Kenwood Music Editor Lite (ver.1.1.0). Kenwood Music Editor Lite
is a Windows-based desktop software that helps organize, manage and transfer
MP3/WMA music files to your USB (MSC) device from your PC. When you playback
audio files that have been stored on your USB (MSC) device using Kenwood Music
Editor Lite through this unit, you can search a file by title, album, or artist
name using the head unit's Music Search function. The Kenwood Music Editor Light
(ver.1.1.0) Windows-based software can be downloaded for free from
Kenwood.com to your PC. The Kenwood Music Editor Light is compatible with
the following Windows Microsoft Operating Systems.
- Windows XP Professional, Home Edition SP2 or later (32-bit)
- Windows Vista (32/64-bit)
- Windows 7 (32/64-bit)
Note: Not compatible with Apple iPod/iPhone/iPad, Zune,
or Android
Aux In: The unit is equipped with a front panel 3.5mm
minijack auxiliary input that can be used to input audio from a portable audio
source, such as a portable MP3 player. The Aux input must be turned on to function. The KDC-X397 allows you to select the
source type displayed when using the auxiliary input. You can choose from AUX,
DVD, Portable, Game, Video, or TV. The
unit has 3 auxiliary input modes.
- On1: Outputs the sound of the external unit connected
to the Aux terminal when switched to the Aux source.
- On2: Activates the attenuator function when turning on
the power with the auxiliary source selected. This prevents the noise when
no external unit is connected to the Aux terminal. Turn off the attenuator
function when listening to output from an external unit.
- Off: Disables the selection of the Aux source.
iPod/iPhone Control
iPod Direct Connection w/ DAC Bypass: The KDC-X397's front-panel USB port acts as an iPod/iPhone high-speed direct
connection when used with the optional Kenwood USB Direct Connection Cable (113KCIP102,
sold separately) or the USB/iPod cable that comes with your iPod/iPhone. If you have an iPod
nano (7th gen), iPod touch (5th gen), or iPhone 5; use the Lighting-to-USB cable
that came with your Apple device to connect to the head unit. Using either cable
allows audio playback, music navigation, information display, and charging of
select iPod/iPhone models from the KDC-X397.
- DAC Bypass: This USB
connection allows your iPod/iPhone's large music libraries to be loaded
instantly to the head unit and sound quality to be maximized through the
head unit's 24-bit D/A converter, allowing for a Signal to Noise ratio up to
110dB. The Kenwood head unit supports audio playback of music files and podcasts
stored on your iPod or iPhone, as well as music apps streamed to your iPhone.
- Music Control: You can choose
to control the iPod/iPhone from the head unit or from your iPod/iPhone's
clickwheel or touchscreen.
- Head Unit: The Kenwood head unit allows you to navigate
your iPod's music by Playlist, Artists, Album, Genre, Composer, Song, or
Podcast. You can search these categories alphabetically or using a
percentage search (0.5%, 1%, 5%, 10%). The head unit also supports Repeat
(file) & Random (folder) playback functions of your connected iPod/iPhone.
- iPod/App Mode: In iPod/App mode, you can navigate the
stored music on your iPod/iPhone from its clickwheel or touchscreen. You can
also listen to your favorite music apps (such as
iHeartRadio,
SiriusXM,
Last.fm,
Rhapsody, &
Slacker)
from your iPhone (iOS 3.0+)
through the Kenwood head unit and your vehicle's speakers. You will continue
to use your iPhone's touchscreen to navigate your apps. Not all apps will be
compatible with App Mode. Access to your iPhone's downloaded applications
will depend on the availability of a cellular and/or WiFi network for
purposes of allowing your iPhone to connect to the Internet.
- Information Display: The KDC-X397
will display your iPod/iPhone's music file information when you are
controlling your iPod or iPhone from the Kenwood head unit. The head unit will
display Track number, Elapsed playing time, Artist name, Song title, and Album
label. If you choose to
operate your connected iPod/iPhone via its clickwheel or touchscreen controls,
the KDC-X397 will not display your iPod/iPhone's music information (the head unit will
instead display "APP/iPod").
- Battery Charging: The head unit's USB connection provides 1A of
current to power and charge your connected iPod/iPhone when your vehicle's
ignition switch is set to the 'ACC' or 'On' position. This unit does not charge
the iPad. If your iPod/iPhone has no initial battery charge,
then the unit will not recognize it.
Pandora App: The
Pandora App (free) lets you play music from
the Pandora music service through the Kenwood Excelon KDC-X397 using your connected
Apple iPhone, via the Kenwood KCA-iP102 USB/iPod connector cable (sold
separately), or the cable supplied with your iPhone. The Kenwood
KDC-X397 provides control over the Pandora music service and displays Artist,
Album, and Song information. You can select Pandora stations from your station
list and sort them by date or alphabetically (A-Z). New stations can be created
based on the current songs or artists playing. You can also save 3 Pandora
stations as presets. You can also skip song
tracks within a station. You can even give songs a thumbs up or thumbs down/ To
access Pandora you must have an Apple iPhone (iOS3 or later) with the latest
version of the Pandora application from Apple's iTunes App Store. Your iPhone
will need an active Data Plan account with connection to the Internet via 3G,
EDGE, or WiFi. You will also need a Pandora music service account.
Note: Access to the Pandora service will depend on the
availability of a cellular and/or WiFi network for purposes of allowing your
iPhone to connect to the Internet. Pandora is not supported in Canada and
only available in the United States.
iPod/iPhone Compatibility Chart:
The Kenwood Excelon KDC-X397 is "Made for iPod/iPhone" compatible and supports the
following iPod/iPhone model features (as of 1/2/2013):
|
Apple Device |
Generation |
Tested Version |
Media Type |
Control Type |
Display Type |
Charge |
|
Audio |
Video |
Head Unit |
iPod/App |
Pandora app |
Artist/Song Text |
Track Info |
|
iPhone |
2G |
3.1.3 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
3G |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
3GS |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
4 |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
4S |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
5 |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
|
touch |
1st |
2.2.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
2nd |
4.2.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
3rd |
5.1.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
4th |
6.0.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
5th |
6.0.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
nano |
1st |
1.3.1 |
Y |
N |
Y |
N |
N |
Y |
Y |
Y |
|
2nd |
1.1.3 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
3rd |
1.1.3 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
4th |
1.0.4 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
5th |
1.0.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
6th |
1.1 PC |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
7th |
1.01 PC |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
classic |
80GB |
1.1.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
120GB |
2.0.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
160GB |
2.0.4 |
Y |
N |
Y |
Y |
N |
Y |
Y |
Y |
|
video |
5th |
1.3 |
Y |
N |
Y |
N |
N |
Y |
Y |
Y |
|
iPad |
1 |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
|
2 |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
|
3 |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
|
4 |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
|
mini |
6.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the head unit and your iPod/iPhone to regain functionality. If
this doesn't work, you may need to wait until a newer software update is
available.
Disc Playback
Disc Compatibility:
The unit features a single disc player that will playback CD-Audio, CD-Text, and finalized
CD-R/CD-RW audio discs.
MP3/WMA Playback: The KDC-X397 can play MP3 (8-320 kbps) and
WMA (32-192 kbps) files recorded on CD-R and CD-RW discs in ISO9660 Level
1/Level 2, Joliet, Romeo, and Long file name formats. Each disc can have a
maximum of 8 directory levels, 50 folders, and 255 files per folder (512 maximum
number of files and folders). During MP3/WMA playback, the unit displays any
recorded ID3 Tag (ver. 1.x/2.x) and WMA Tag information - up to 60 characters.
Text Scroll: The KDC-X397 will display CD text or Audio file
text. You can set the text scrolling feature to three different modes (Auto,
Once, or Off) to scroll longer titles across the screen.
Music Search: The Kenwood AM/FM CD receiver features a Music
Search feature which allows you to scroll through and select your MP3/WMA music
folders and files, as well as scroll through your audio CD's music tracks using
the head unit's rotary knob.
Direct Music Search: The supplied IR wireless remote control
(RC-406) allows you to search for music directly by entering the track number.
Playback Modes: The Kenwood Excelon KDC-X397 features the following Repeat,
Random, and Scan playback modes.
- Repeat Play: Track, File, or Folder
- Random Play: Disc or Folder
- Scan Play: Track or File (plays the first 10-seconds of each
music track on a disc or music file in a folder)
Last Position Memory: If the unit is shut off or switched to
the tuner mode while a CD is playing, the next time CD is selected as the
source, playback will resume from the point where it left off.
CD Read: This function sets the method for reading a CD
disc. You can choose between two modes.
- CD1: Automatically distinguishes between audio file
disc and music CD when playing a CD or CD-R/RW disc.
- CD2: When unable to play a special formatted CD, set
this function to CD2 to force playing. Some music CD discs may be
unplayable even when set to this mode.
Off Insert/Eject: A CD disc can be inserted or ejected with
the power off. When a disc is inserted with the power off, the unit will
automatically power up and begin playback.
Auto Reload: If the ejected disc is not removed within 15
seconds, the disc is automatically inserted again into the loading slot to
protect it from dust.
AM/FM Tuner + SiriusXM Ready
AM/FM Tuner: The Kenwood Excelon KDC-X397 features a built-in AM/FM
tuner. You can choose one of four tuning methods: Auto 1 (seek tuning), Auto 2
(cycles through and tunes the selected band's preset stations only with each
button press), Manual Tune, or Direct Access (via remote).
Tuner Presets: The KDC-X397's tuner features 3 FM banks (1,
2, 3) and 1 AM bank for storing presets. The Kenwood Excelon KDC-X397 offers two preset
modes.
- Normal: You can store 6 presets for each AM/FM bank
giving you a total of 18 FM presets and 6 AM presets (total of 24).
- Mix: A total of 6 preset stations can be assigned to
the head unit's 6 preset buttons, regardless of AM/FM band. This lets you
recall a preset station without switching between bands.
Auto Memory Tuning: Not only does the CD receiver's tuner
allow you manually enter your desired presets you can choose to have the unit
automatically put stations with good reception in the memory banks
automatically; this is a handy feature when traveling.
Direct Access Tuning: You can directly access an AM/FM
station by entering in the frequency number using the include wireless remote
control.
Mono Mode: The Mono mode improves the radio's FM reception,
but the stereo effect will be lost.
SiriusXM Ready: The Kenwood Excelon KDC-X397 comes ready for
SiriusXM programming with access to XM and Sirius Satellite Radio stations.
Thanks to its proprietary SiriusXM Connect port, you can add the optional
SXV200V1 SiriusXM Connect tuner and receive more than 150 channels of
exclusive programming directly from SiriusXM, via the "SiriusXM
All Access" package (subscription required). Visit
SiriusXM.com
for a complete list of subscription options and channel guide. Additional
features of the SXV200 SiriusXM Connect tuner include:
- Channel list displays a list of all available channels
- Category Search searches for channels in a certain category
- Displayed Information such as Channel Name, Artist Name, & Song Title
can be viewed on the head unit's LCD
- Up to 18 SiriusXM Satellite Radio station presets
- Direct Tuning via included remote
- Supports the SiriusXM Instant Replay function, so you can pause, rewind,
and replay up to 30 minutes of live content
- Channels containing unsuitable content for children can be blocked
Note: A separate SiriusXM Satellite Radio subscription
is required (operates on the XM Network). However, you can easily add this
SiriusXM tuner to an existing Sirius or XM account for a Multi-Radio
Discount Plan.
Display Features
Detachable Face:
The Kenwood Excelon KDC-X397 features a single front loading CD face that detaches from the chassis
to deter theft. The head unit includes a cloth pouch for storing the face-plate
when detached. An optional soft face case (142DFC1X,
sold separately) can also be purchased for this unit. A face-fixing screw is
supplied for making the face non-detachable, if desired.
Fluorescent Display: The Kenwood head unit features a
single-line, 11-character, bluish-white backlit fluorescent display.
Variable Color Button Illumination: The Kenwood KDC-X397
features variable color button illumination. You can choose from one of 24
preset colors, have the unit scan through all 24 preset colors continuously, or
customize your own color (RGB; 0-9). The custom setting allows you to
individually adjust the intensity of Red, Green, and Blue (from 0-9) to better
match your vehicle's interior lights. The Kenwood logo and eject button remain
red.
Illumination Dimmer: You can manually dim the LCD and button
illumination to better suit the time of day. The Kenwood logo and eject button
do not dim.
Display Illumination/Clock
Display: When the unit is in Standby mode, the face and button illumination
is "keyed." When the Clock Display is turned on and
the unit is in Standby mode, the Clock Display is also "keyed." Pressing and
holding the source button turns the unit off completely.
Demo Mode: This unit features a Demo mode which can be
turned On or Off within the menu.
Remote Control
Wireless Remote Control: The KDC-X397 comes with an IR
remote control (RC-406) for wireless operation of the head unit. The remote will
control Audio, CD, USB, and Tuner functions. It is powered by a single CR2025 3V
lithium-cell battery (supplied).
- Numeric Keypad: The wireless remote control features a
numeric keypad (0-9) which allows direct track access of your music tracks &
files (from CD or USB), as well as AM/FM presets.
- Attenuator: The CD receiver features an Attenuator button on
the supplied remote control that turns the volume down very quickly with one
touch of the button.
Steering Wheel Remote Compatibility: The head unit features
an OEM steering wheel remote control input wire (blue/yellow) within the included wiring harness
that lets you keep your vehicle's factory radio steering wheel remote controls when used with
an optional
steering wheel audio control adapter (sold separately). Please consult
Crutchfield's
Outfit My Car to see if your vehicle is compatible.
